arduino on atmega32
this solution works
http://wiki.edwindertien.nl/doku.php?id=software:bootloaders#arduino_bootloader_for_atmega32
after flashing the bootloader i got the "hello world" flashing led on pin 1 = "PB0"
arduino-ide connections:
arduino to atmega32
D10 to pin 9 = RESET
D11 to pin 6 = MOSI
D12 to pin 7 = MISO
D13 to pin 8 = SCK
Connect VCC, AVCC, GND and the 16Mhz crystal.
done.
this solution works
http://wiki.edwindertien.nl/doku.php?id=software:bootloaders#arduino_bootloader_for_atmega32
after flashing the bootloader i got the "hello world" flashing led on pin 1 = "PB0"
arduino-ide connections:
arduino to atmega32
D10 to pin 9 = RESET
D11 to pin 6 = MOSI
D12 to pin 7 = MISO
D13 to pin 8 = SCK
Connect VCC, AVCC, GND and the 16Mhz crystal.
done.

Комментариев нет.